Payment & Shipping Terms:
|Place Of Origin:||Xaimen, China (Mainland)||Accuracy:||±2%|
|Application:||Testing Water Quality||Color:||BLACK|
Hydrogen electrolysis is the process of running an electrical current through water (H2O) and separating the hydrogen from the oxygen. Hydrogen electrolysis has met commercial resistance in the past but much of that resistance is now fading. Hydrogen electrolysis now offers much hope for making real the dream of hydrogen cars running upon the hydrogen highways of the world.
Researchers at two of the U. S. Department of Energy’s other laboratories (National Energy Technology Laboratory and Argonne National Laboratory), though, have found a method to make this process more efficient and economically viable for commercial use. According to the DOE, the Catalytic Decomposition of Water Method “…provides a new route for producing hydrogen from water by using mixed proton-electron conducting membranes. Water is decomposed on the feed surface. The hydrogen is ionized and protons and electrons travel concurrently through the membrane. On the permeate side, they combine into hydrogen molecules.”
Stuart Energy, which has already won many contracts for hydrogen fueling stations across the United States, uses circular electrolysis cells and an alkaline inorganic ion-exchange membrane to produce hydrogen from water. Proton Energy Systems, which has also won contracts in California and across the nation have developed their own PEM hydrogen electrolysis technology called HOGEN. The HOGEN hydrogen generation product is an on-site, one-box, automated system that eliminates the physical delivery of hydrogen to a facility by allowing a company to generate its own hydrogen fuel using electricity and pure water.
One the front end of hydrogen electrolysis, many methods currently in use for electrical production can be fitted for hydrogen production as well. Hydro-electrical power from dams, wind-energy and solar energy sources can all be fitted with hydrogen electrolysis units in order to produce enough hydrogen for your hydrogen cars to run on in the future.
It’s only a matter of time before hydrogen electrolysis is used to power our cars, homes and businesses. Remember how long the Internet and cellular phones have been around. Not that long. Hydrogen power will also take the world by storm sooner, rather than later.
100% brand new and high quality
Great practical significance for when the need to test water,you can clearly see the actual situation of everyday drinking water.
How to use:
1. ready to test the water - take two capacity of 100 to 150 ml of white glass, take a cup of water, RO machine pick another cup
of water, and discharge on the table.
2. ready to test - the electrolyzer flat on the glass, 220-volt power plug.
3. test - the power button on the electrolysis
Press the ON (open) position, begin testing.
4. Typically the test time is 30 seconds. At the end, turn the power switch is pressed to the OFF (OFF) position,
and finally remove the electrolyzer.
Testing Analysis Results:
Yellow: dissolve Sanso, silicon compounds, organic minerals, molybdenum, silicon, fluoride, other organics
Green: arsenic (arsenic), mercury, lead, copper, sodium
Blue: bacteria, viruses, carcinogens, organic phosphorus (fertilizers, detergents and pesticides)
Red: iron and rust, bacteria
White: lead, zinc, mercury, inorganic dirt
Black: heavy metals (zinc, lead, copper, chromium, manganese, cadmium)
Water quality standards to measure:
Does not contain any harmful substances and odors (especially heavy metals and organic compounds).
Softness and hardness of water, usually between 50-200mg / L (as calcium carbonate).
PH value between weakly alkaline (7.0-8.0).
Water and trace elements, and the proportion of moderate mineral content, similar to the normal liquid;
Dissolved oxygen and carbon dioxide content of moderate (dissolved oxygen ≥6-7mg / L).
Water stronger nutritional physiological functions (including dissolution, penetration, diffusion capacity, metabolic power, emulsifying power, clean power, etc.).
When powered on, the hand can not touch the electrode; finger does not insert into the test water;
do not let children play electrolyzer.
Finished, clean electrode with a dry cloth , and safekeeping.
The tester can not be used to evaluate the quality of mineral water, because when using the measurement of mineral water,
mineral water and other contaminants may also be some chemical reactions in the water, will give users a miscarriage of justice.
Do not use a metal container to test.
Main Color: Black
Net Weight: 153g
1 x Water electrolysis Set
Q1:How to place an order? What about prices?
Please send an inquiry or contact with online service, after receiving your inquiry . we will reply you with prices and information; Or catalog with full prices, thank you.
Q2: What is your minimum order requirement?
Yes,to support your business, we accept sample order, trial order to test our products and your market. thank you!
Q3: What is your payment terms?
T/T, L/C.Thank you.
Q4: Do you provide OEM,ODM,customized manufacturing service?
Yes,we warmly welcome your customized requirement, and we have designer who can realize your idea specifications on paper easily and turn them into the specific goods.We are sure to be your unique and reliable partner of OEM business.Thank you!
Contact Person: Carey Gao