Payment & Shipping Terms:
|Item:||Reverse Osmosis Equipment||Stable Rejection::||96~98%|
|Filter:||Osmosis System Water Filter||Type:||Water Filter Parts|
|Layer:||11~16 Optional To Customer||Application:||Household Drinking Water System|
|Length:||305 Mm||Function:||Water Filter|
|Filter Precision:||0.0001 Micron||Capacity:||100GPD|
100 gpd large flow residential ro membrane composite film revers osmosis elment manufacturers
Fangcheng RO membrane series is the latest company, which is used in the research and development of surface water and groundwater desalting of ultra-low Pressure aromatic polyamide composite membrane element, can operate in Low Pressure reach and conventional low-pressure membrane under the condition of the same high water flux and desalination rate.Its operation pressure of about two-thirds of conventional composite membrane operation pressure, desalination rate can reach 99.5%.Lower the associated pumps, pipe, container equipment investment cost and operation cost of reverse osmosis system, improve the economic benefit.ULP series of membrane element used in salt content about 2000 parts per million of surface water, groundwater, water treatment and municipal water water desalination, is mainly used in all kinds of the size of the boiler make-up water, pure water, food processing and pharmaceutical industry and other fields.
Semipermeable membrane to remove ions, molecules, and larger particles from drinking water Can remove chlorine, fluoride,bacteria, microorganism, etc
|Stable Desalination %||96~98%||96~98%||96~98%||96~98%|
Mean Permeable Flow GDP (L/d)
|Active Film Area ft2(m2)||4(0.4)||4.2(0.42)||5.0(0.5)||5.3(0.53)|
|Test Condition||Test Pressure||65pai(0.45Mpa)|
|Test Water Temperature||25℃|
|Test Water Concentration(NaCl)||500ppm|
|Test Water PH||6.5-7.5|
|Recycle Rate %||15|
|Max Operating Temp.||300psi(2.0Mpa)|
|Max. Inlet Water Temp.||45°C|
|Max Water Inlet Silt Density Index (SDI)||5|
|Inlet Water Chlorine Tolerance||<0.1mg/l|
|Inlet Water PH Range, Continuous Operation||3~10|
|Inlet Water PH Range, Short-Term Cleaning||2~11|
|Max. Pressure Drop of Single Membrane||10psi(0.07Mpa)|
1. Q: Where is your factory, which port for transportation?
A: Our factory located in Xiamen, Welcome to vist our factory. the port is Xiamen port.
2. Q: How can I get some samples?
A: We are glad to provide you the free sample, leave your contact info pls.
3. Q: Can you accept OEM & ODM?
A: Yes, we can accept OEM &ODM
4. Q: What is the delivery time?
A: Within 7 days after receive your payment, accordding to your quantity
5. How to make payment?
A: We accpet T/T,Paypal.Western Union and cash face to face.
6. Q: How can I contact you?
A: Please contact us though below methods, we will reply you within 24 hour.
Contact Person: Kelly Wu